新型系列不锈钢焊条研究
The research on new series of stainless steel welding rod
浏览(1700) 下载(1)
- DOI:
- 作者:
- 崔晓东, 唐伯钢
Cui Xiaodong, Tang Bogong
- 作者单位:
- 冶金部建筑研究总院, 北京海淀区 100088
- 关键词:
Stainless steel;Welding rod;Technology;Corrosion control;Research
- 摘要:
- 针对国产不锈钢焊条在工艺性能和耐腐蚀性能方面存在的不足，通过与国际名牌产品的对比研究，提出改进途径和配方工艺，研制成功新型系列不锈钢焊条，各项数据表明其性能已达到国际同类先进产品水平，可以取代进口产品。
To counter the deficiencies of the domestically made welding rods in the properties of technology and corrosion resistance and through comparing and researching on the welding rods of internationally famous brands, improving ways and formulating technology were proposed, and a new series of stainless steel welding rod was developed. It is shown by every items of data that the properties of this new series of welding rod have come to the standards of the advanced products of the same kind in the world. This kind of welding rod can take the place of imported producls.1995,6(6): 1-4 收稿日期：1995-6-12分类号：TG422参考文献：
1 王嘉玲, 潘际銮.用“ 模糊聚类分析” 研完不锈钢焊条工艺稳定性. 焊接学报, 1988;(1)
2 邹茉莲, 周俊, 周达. 国内外不锈钢辉条的对比. 石油工程建设, 1991 ,17 (l)
3 孙咸, 陆文雄. 不锈钢焊条药皮的温升开裂.焊接学报,1992;(4)
4 冈毅民.中国不诱钢腐蚀手册. 北京: 冶金工业出版社.1992
5 唐伯钢. 今后十年国内外焊接材料生产和使用的发展趋势.焊接技术,1994;(6)