不锈钢管内充氮保护的TIG焊工艺
Stainless Steel Pipe TIC Welding Process with Shielded Nitrogen Gas in Pipe
浏览(2050) 下载(2)
- DOI:
- 作者:
- 齐玉宏
Qi Yuhong
- 作者单位:
- 兰化化建公司,甘肃省兰州市730060
Lanzhou, Gansu
- 关键词:
- 不锈钢;钢管;焊接;气体;保护;工艺;试验
Stainless creel;Steel tube;Welding,Gas;Protection;Technology;Testing
- 摘要:
- 采用价格低廉的氮气代替氩充入1Cr18Ni9Ti不锈钢管内进行的TIG焊工艺试验表明：不锈钢氩弧焊焊缝背面充氮保护可有效防止焊缝背面氧化，氮天明显的溶入反应，对焊缝的组织和性能无不利影响，焊接质量可满足工程需要，且比充氩保护降低成本30％以上。
The test of TIC welding process that pours cheap nitrogen gas into 1Cr18Ni9Ti stainless steel pipe substituted for argon indicates that stainless steel argon arc welding with nitrogen gas protection in back surface of welding seam can prevent back surface of seam oxidizing effectively.The nitrogen gas doesn't have obvious dissolution reaction and it has no harmful effect on constitution and property of welding seam .The process can meet thr requirement of welding quality and reduce more than 30% of cost than using argon.1998,6(6): 22-25 收稿日期：1998-7-6参考文献：
[1] 夏天东,陈学定,杨光起,赵峰.1Cr17Ni13Mo2Ti焊缝冲击韧性及冷弯性能研究[J].焊接学报.1993(02).
[2] 李长城,肖尔波.手工钨极氩弧焊采用药芯焊丝焊接奥氏体不锈钢[J].焊接技术.1992(05).
[3] 田燕主编.焊接区断口金相分析[M].机械工业出版社,1991.
[4] 中国机械工程学会焊接学会编著.焊接金相图谱[M].机械工业出版社,1987.
[5] Kuwana,Takeshi,Kokawa,Hiroyuki.Nitrogen Absorption of Stainless Stell Weld Metal in Presurized Weling Atmospheres 1987 .
[6] Kearns,J.R.Effect of Nitrogen on the Corrosion Resistance of Austentic Stainless Alloys Containing Molybenum 1984.