回弹法检测隔热耐磨衬里强度的探索与实践
Research&Practice of Rebound Method to Test Insulation/Wear-resisting Lining Strength
浏览(1761) 下载(1)
- DOI:
- 作者:
- 曾昭群
Zeng Zhaoqun
- 作者单位:
- 茂名石化建设公司检验中心,广东省茂名市 525011
- 关键词:
- 衬里;强度;测试;经验数据;方程
Lining;Strength;Testing;Eopirical data;Equation
- 摘要:
- 目前对设备衬里强度的原位检查是定性的,通过对国产炼油化工装置所用隔热耐磨衬里的一系列回弹试验,表明隔热耐磨衬里的回弹是可行的,进而得出衬里回弹的专用测强曲线和经验公式,供对设备衬里的强度进行原位定量检测时参考.
At the present,to test equipment lining strength is a qualitative analysis method.It is proved that rebound method to test insulation/wear-resisting lining strength is possible after a series of the tests.The test diagram was established which can be referenced while the lining strength is tested in quanlitative analysis.2000,5(5): 25-27 收稿日期：2000-2-1参考文献：
[1] JGJ/T23-92回弹法检测混凝土抗压强度技术规程.
[2] SH3531-94隔热耐磨混凝土衬里技术规范