国外管道防腐涂敷中的化学预处理工艺
Foreign Chemical Pretreatment Process Applied in Pipeline Anticorrosion Coating
浏览(2209) 下载(3)
- DOI:
- 作者:
- 相政乐, 王铭浩, 贾振, 张宏, 赵利, 陆娟
XIANG Zheng-le, WANG Ming-hao, JIA Zhen
- 作者单位:
- 中海油能源发展股份有限公司管道工程分公司, 天津 300452
CNOOC Energy Technology & Services-Pipe Engineering Co., Tianjin 300452, China
- 关键词:
- 管道;防腐;酸洗;铬酸盐;硅烷
pipeline;anticorrosion;acid washing;chromate;silane
- 摘要:
- 首先分析了管道防腐涂敷工艺中引进化学预处理工艺的必要性，其次介绍了3种钢管表面化学预处理工艺的原理及工艺流程。磷酸洗工艺能明显提高钢管表面清洁程度，改善涂层性能；铬酸盐钝化工艺能将抛丸除锈或酸洗后钢管表面由不稳定的化学状态转变为化学成分均一稳定的状态；由于环保方面的原因，硅烷化学处理有替代铬酸盐钝化工艺的趋势，试验证明了该工艺的有效性。
Firstly, the necessity of applying chemical pretreatment process in pipeline anticorrosion coating process is analyzed. Secondly, the mechanisms and process flows of three kinds of pipe surface chemical pretreatment processes are introduced. Among them the phosphoric acid washing process can effectively improve pipe surface cleanliness and coating performance; the chromate passivation process can turn the unstable chemical state of the pipe surface treated by blast cleaning or phosphoric acid washing into the stable chemical state with uniform chemical composition; the silane chemical treatment is likely to replace the chromate passivation process for its environment-friendly property and the industrial tests have showed its effectiveness.2013,1(1): 6-8 收稿日期：2012-5-10DOI：10.3969/j.issn.1001-2206.2013.01.002作者简介：相政乐（1980-），男，山西运城人，工程师，2006年4月毕业于天津大学，硕士，现从事海洋管道防腐、保温及配重技术研究工作。参考文献：
[1] Alan KehrJ.Fusion-BondedEpoxy[M].Houston，TX:NACEInternational the Corrosion Society，2003. 283-284.
[2] 李汝江，韩秀林，王友生，等. 钢管 3PE 外防腐工艺的探讨[J]. 焊管，2008，31（6）：75-77.
[3] Valmore Rodriguez，Lino Castaneda，Beatriz Luciani，et al. Effect of Contaminants on FBE Performance[A]. Corrosion 1998 [C]. San Diego，CA：NACE International，1998.
[4] Bates C，Norman D. Managing risk：Are your coated pipes fit for purpose[A]. 16th International Conference on Pipeline Protection[C]. Paphos，Cyprus：ICPP，2005.
[5] NACE RP0394-2002，Application，Performance，and Quality Control of Plant-Applied，Fusion-Bonded Epoxy External Pipe Coating[S].
[6] OMWD 06-2008， Standard Specification Section 15257， Steel Pipe， Fusion-bonded Epoxy Lined and Coated[S].
[7] IPS G TP 335，Material and Construction Standard for Three Layer Polyethylene Coating System[S].
[8] 3M Company. 3MTMScotchkoteTMFusion-Bonded Epoxy Coating 626-120 For Multi-Layer Polyolefin Systems Application Guide[M].Austin，TX：3M Ltd. 2009.
[9] Bredero Shaw Company. Manufacturing Procedure for Dual Powder Anti-Abrasion ExternalFusion Bond Epoxy Coating[M]. Brian Elliott， Canada：Bredero Shaw Ltd，2005.
[10] VarugheseK，Edmondson.Roleofpho sphoric acid was hand chromate treatment on cathodic disbondment and adhesion properties of fusion bonded epoxy coatings[A]. 16th International Conference on Pipeline Protection[C]. Paphos，Cyprus：ICPP，2005.
[11] Alan Kehr J. Fusion-Bonded Epoxy[M]. Houston，TX：NACE International the Corrosion Society，2003. 287-288.
[12] Alan Kehr J. Fusion-Bonded Epoxy[M]. Houston，TX：NACE International the Corrosion Society，2003. 289-290.
[13] Gailllard G， Bouliez J L. A New Application Process That Assures Good Adhesion of Fusion Bonded Epoxy Coatings Exposed to Very Severe Conditions[A]. Corrosion 2011[C]. Houston，TX：NACE International，2011.