环氧粉末防腐涂层厚度、温度与性能关系的试验研究
Test Research on Relationship among Thickness, Temperature and Performance of Epoxy Powder Anticorrosion Coatings
浏览(2074) 下载(1)
- DOI:
- 作者:
- 刘红伟1, 郑中胜2
LIU Hong-wei1, ZHENG Zhong-sheng2
- 作者单位:
- 1. 中国石化管道储运公司华东管道设计研究院, 江苏 徐州 221008;
2. 河北昊天管业股份有限公司, 河北 盐山 061300
East China Pipeline Design Institute, SINOPEC Pipeline Storage and Transportation Co., Xuzhou 221008, China
- 关键词:
- 原油管道;防腐;环氧粉末;工艺参数;试验
crude oil pipeline;anticorrosion;epoxy powder;process parameter;test
- 摘要:
- 日照—仪征原油管道外防腐层主要采用加强级熔结环氧粉末，为了更好地控制该工程环氧粉末的施工参数，研究了环氧粉末涂层厚度、固化温度与涂层性能的关系。研究结果表明，熔结环氧粉末涂料涂敷厚度在550μm左右、温度在210℃左右时性能最好。该研究结果的工程应用表明，日照—仪征原油管道全线防腐层破损点984个(线路总长390km)，平均每千米仅为2．6个，控制效果良好。
The external anticorrosion layer of Rizhao-Yizheng Crude Oil Pipeline mainly consists of fusion bonded epoxy power coating. In order to better control the construction parameters of the epoxy powder, the test research is carried out to clarify the relationship among thickness, temperature and performance of the epoxy powder coating. The results indicate that the performance of the coating with the thickness of about 550 μm and the temperature at 210℃ is best. The engineering application based on the research results shows that Rizhao-Yizheng Crude Oil Pipeline has the defect points of 2.6 per kilometer in average （total 984 defect points in 390 km long pipeline） in anticorrosion layer. The coating quality control effect is perfect.2012,6(6): 61-62 收稿日期：2012-1-12作者简介：刘红伟（1980-），男，河北衡水人，工程师，2003年毕业于江苏工业学院过程装备与控制专业，现从事工程管理工作。参考文献：
[1] Popovoci V. Update on the development of international standards[J].Pipeline Gas Journal ,2010,237（8）:70-73.
[2] Thomas C. Covering the world's pipeline-inside and out[J]. World Pipeline ,2010,10（11）：26-32.
[3] Palazzetti R. A coating innovation[J]. World Pipeline ,2011,11（1）：59-63.
[4] SY/T0315-2005，钢质管道单层熔结环氧粉末外涂层技术规范[S].
[5] 王建国， 赵敏刚. 钢质管道单层熔结环氧粉未涂层工厂化生产质量控制[J]. 石油工程建设，2002，28（6）：38-40.