管道全位置自动封底焊技术研究
Research on All Positions Automatic Back Sealing Weiding Technique
浏览(3755) 下载(1)
- DOI:
- 作者:
- 唐德渝, 冯标, 李春润, 张永晟, 张建护, 侯泽峰
TANG De-yu, FENG Biao, LI Chun-run, ZHANG Yong-sheng, ZHANG JIAN-hu, HOU Ze-feng
- 作者单位:
- 中国石油集团工程技术研究院, 天津 300451
CNPC Research Institute of Petroleum Engineering and Technology, Tianjin 300451, China
- 关键词:
- 长输管道;全位置焊接;封底焊;熔滴过渡;传感器
long distance pipeline all position;back sealing weiding;melting droplet transfer;sensor
- 摘要:
- 针对长输管道封底焊道焊接存在的问题,研制成功能够进行长输管道自动封底焊的经济实用型系统设备及配套技术,从焊接电源、控制技术、工艺方法以及焊丝等方面全部实现了国产化,替代了进口设备和技术,并且具有如下技术特点:专用熔化极焊接电源采用组合脉冲熔滴过渡控制技术,其主控制系统以工业控制机为核心,实现了焊接参数的可编程控制;结合多轴运动控制卡,实现对焊接执行系统的直流伺服电机和步进电机的驱动控制。文章还介绍了焊接工艺试验及取得的全自动封底焊的最佳工艺参数。
An economical and practical equipment and matching technique of automatic back sealing weiding for long distance pipeline were successfully developed. Fully domestic production is realized in respects of weiding electric power source, control technique, weiding process and weiding wire, so as to replace the imported equipment and technique. It possesses the following features: combined pulsed droplet transfer control technique is applied in special metal are weiding power source, the main control system with kernel industrial PC is capable of programmable control for weiding parameters, associated with multi-axes motion controller, the driving control of direct current servo electric motor and step driven motor of weiding performing system is realized. Also this paper introduces the weiding process testing and acquired optimum parameters of automatic back sealing weiding.2006,1(1): 50-54 收稿日期：2005-8-15分类号：TE973.3基金项目：中国石油天然气集团公司重点科研项目(03B411106)作者简介：唐德渝(1961-),男,重庆人,1982年毕业于重庆大学,高级工程师,长期从事石油工程焊接技术的研究开发,取得多项有应用价值的成果.参考文献：
[1]潘际銮.现代弧焊控制[M].北京:机械工业出版社,2000:96-128.
[2]张光先.CO2气保焊表面张力过渡的建模及仿真[J].焊接学报,2003,24(8):68-72.
[3]杭争翔.降低CO2气体保护熔化极电弧焊飞溅的途径[J].电焊机,2000,30(12):27-29.
[4]王爱珍.粗丝CO2全位置熔滴过渡特性的研究[J].郑州轻工业学院学报,1995,10(2):24-27.
[5]Chol B H,Lee J Y,Yoo C D.Simulation of dynamic behavior in a GMAW system[J].Welding journal,2001,80(10):239-245.