大型平台陆地预制组片的防变形控制
Deformation Control of Prefabricating Piece-assembled Module of Large Scale Platform in Land
浏览(2243) 下载(1)
- DOI:
- 作者:
- 孙国青
SUN Guo-qing
- 作者单位:
- 胜利油田胜利石油化工建设有限责任公司, 山东东营 257231
Shengli Oilfield Petrochemical Construction Co.,Dongying 257000,China
- 关键词:
- 大型海上平台;预制;组片;防变形措施
large scale offshore platform;prefabrication;piece-assembly;anti-deformation measure
- 摘要:
- 南堡35-2项目CEP平台,单片预制组装达千吨,平台总质量达5千多吨,文章以该平台为例,根据相关规范标准以及多年积累的施工经验,分析了千吨级以上大型平台陆地组片的防变形控制问题,提出了具体的预防措施。
In the CEP platform construction of Nanpu 35-2 Project, single prefabricated module weighs one thousand tons and the total platform weight is more than five thousand tons. Taking this platform as an example, and based on relevant codes and standards as well as many years' construction experience, this paper analyzes deformation control of prefabricating piece -assembled modules of large scale platforms with the weight over one thousand tons in land, and brings forward some concrete preventive measures.2008,6(6): 35-37 收稿日期：2007-12-27分类号：TE952作者简介：孙国青（1979-），男，吉林通榆人，2003 年毕业于长春工业大学，从事石油化工工程建设工作。参考文献：
[1] 王元良，王承权. 焊接手册[M]. 北京：机械工业出版社，1995.
[2] 李春胜，黄德彬. 金属材料手册[M]. 北京：化学工业出版社，2005.