燃气驱动压缩机组成套供货中的电气设计注意事项

浏览(2270) 下载(2)

作者单位:: 中国石油工程设计有限责任公司北京分公司,北京 100085
Beijing Company of China Petroleum Engineering Co., Ltd., Beijing 100085, China

关键词:: 压缩机供货;撬装商;设计院;设计;注意事项
compressor supplier;skid-mounted equipment supplier;design institute;design;points forattentron

摘要:: 在天然气长输管道及城镇燃气输配系统中,采用橇装燃气驱动压缩机组的方式为管网增压已较为普遍,压缩机采用橇装方式供货,由于橇装商技术水平参差不齐及橇装商和设计院分工不明确等原因,因而会造成-些纠纷,给现场施工带来很多不便,甚至会给生产运行带来安全隐患。笔者根据此类工程的实践经验,提出设计院电气专业在设计中应注意的事项。
Skid-mounted gas-engine driven compressor sets have been widely utilized for pipeline net-work supercharging in the long-distance gas pipeline systems as well as in the town’s gas transmission anddistribution systems. Because the technical level distinction among skid-mounted compressor suppliers andsome ambiguities in work dividing between the design institutes and the skid-mounted compressor suppliers,disputes will incur and cause inconveniences to field construction. Based on the engineering experience fromsuch projects, the author presents the points for attention in electrical design done by the electrical engineersof design institute.

2009,5(5): 17-18 收稿日期：2008-12-5

分类号：TU996.7

作者简介：韩少君(1973-),男，甘肃兰州人，工程师，1995年毕业于兰州铁道学院工业电气自动化专业，现从事石油天然气工程电力设计工作。