2000m3丙烯球罐设计研究
Study on Design of 2000m3 Propylene Spherical Tank
浏览(2216) 下载(7)
- DOI:
- 作者:
- 丘志坚, 王艳, 支淑民, 李玉华
QIU Zhi-jian
- 作者单位:
- 山东胜利职业学院,山东东营 267022
Shandong Shengli Vocational College,Dongying 267022,China
- 关键词:
- 球形储罐;设计;结构;材料;参数
spherical tank;design;structure;material;parameter
- 摘要:
- 文章从材料选择、参数确定和结构设计等方面对2000m3丙烯球罐的设计予以阐述,说明大型球罐设计应从球罐的全寿命期着手,为后续的制造、安装、使用、检测、维修及再生等工作创造条件。本次丙烯球罐设计选用15MnNbR材料,设计压力2.16MPa,设计温度50℃,球壳设计壁厚53.5mm,球壳采用混合式四带十支柱结构型式,支柱采用赤道正切式的U型管柱结构型式。球罐建成投产后运行效果良好。
The design of a 2000m3 propylene spherical tank is expatiated in aspects of material selection,parameter determination and structural design.The design of large scale spherical tank should commence in the consideration of total life cycle and create necessary conditions for subsequent work such as manufacture,installation,usage,inspection,maintenance and regeneration.In the design of the 2000m3 propylene spherical tank,the tank material was 15MnNbR，design pressure was 2.16 MPa，design temperature was 50 ℃，design wall thickness was 53.5 mm，tank shell structure adopted a mixed type of four belts with ten support pillars,and the pillar structure adopted U shaped type of equator tangent mode.2009,4(4): 21-24 收稿日期：2008-4-11分类号：TE972.1作者简介：丘志坚(1965- ),男,广东兴宁人,高级讲师,1990年毕业于江汉石油学院机械工程专业,现从事机械工程教学工作.参考文献：
[1] 陈晓,秦晓钟.高性能压力容器和压力钢管用钢[M].北京:机械工业出版社,1998.
[2] GB150-1998,钢制压力容器及第1号修改单[S].
[3] GB13337-1998,钢制球形储罐[S].
[4] GB 6654-1996,压力容器用钢板[S].